How to Clean Rexton Hearing Aids
Rexton hearing aids are precision devices that rely on clean components to deliver clear sound. Regular cleaning helps maintain performance, extend device life, and reduce ear irritations. This guide outlines a practical, step-by-step approach using common cleaning tools designed for Rexton devices.
Quick Answer
Use a dedicated Rexton hearing aid cleaning kit with brush and wax remover for daily care, a hearing aid cleaning brush and wax pick set for Rexton for precise removal of wax, and a Rexton drying box dehumidifier for hearing aids after cleaning sessions. Clean once daily or as needed, avoid moisture exposure, and store in the drying box when not in use.
What You’ll Need
- Rexton hearing aid cleaning kit with brush and wax remover
- Hearing aid cleaning brush and wax pick set for Rexton
- Rexton drying box dehumidifier for hearing aids
Before You Start
Set aside a clean, well-lit workspace. Remove the batteries if your model allows it before cleaning to minimize electrical risk. Always handle the devices gently to avoid damage to microphones and receivers. Do not use household cleaners, solvents, or water directly on the hearing aids. If you wear an earmold, remove it carefully before cleaning and clean the earmold separately following your clinician’s instructions. Allow any damp components to air dry completely before reassembly.
Step-By-Step: How To Clean Rexton Hearing Aids
- Inspect the hearing aids for visible debris or moisture, and power them off if possible.
- Use the Rexton cleaning kit with brush to brush away dust and particle buildup from the exterior surfaces and around openings.
- Gently brush the microphone and vent areas to dislodge wax without pressing too hard.
- Apply the wax remover from the kit to a soft cloth or microfiber pad, then carefully wipe away any wax around the receiver and wax guards if present.
- For hard-to-reach areas, use the wax pick from the set to lift wax globs away from crevices. Avoid prying or digging forcefully.
- Check the battery compartment if your model uses replaceable cells. Wipe the edges carefully to remove corrosion risks and ensure the compartment is dry.
- Place the hearing aids in the Rexton drying box dehumidifier according to the manufacturer’s instructions to remove residual moisture.
- Leave the devices in the drying box for the recommended duration, typically several hours or overnight, before using them again.
- Reinsert batteries or reinstall the devices and perform a quick audio check to confirm clarity and operation.
- Record a cleaning log to remind yourself of routine maintenance and any pattern of issues (e.g., more wax buildup or humidity concerns).
- Store the hearing aids in a clean, dry case when not in use to prevent dust and moisture exposure.
- Schedule regular professional cleanings and check-ups with an audiologist if you notice reduced sound quality or fit issues.
Troubleshooting
| Symptom | Likely Cause | Fix | Prevention |
|---|---|---|---|
| Reduced sound clarity | Wax blocking the receiver | Carefully remove wax with pickup tool; clean with kit | Daily brushing and wax removal routine |
| Moisture after cleaning | Residual humidity in device | Return to drying box and recheck after drying cycle | Always dry after use; avoid humid environments |
| Excessive feedback or whistling | Wax or debris around earmold/receiver | Re-clean the openings and reseat the earmold | Inspect seals regularly and replace worn parts |
| Drying box shows error | Device not seated properly or moisture present | Follow manual reset steps and ensure proper placement | Keep the drying box lid closed during cycles |
Common Mistakes
- Don’t use water or household cleaners on the hearing aids
- Avoid aggressive scrubbing that can damage microphones or receivers
- Don’t skip the drying step; moisture accelerates corrosion
- Never force parts or attempt to disassemble unless advised by a clinician
Tips For Best Results
- Clean at a consistent time each day to form a routine and reduce wax buildup
- Store devices in the drying box after every cleaning session to maintain moisture control
- Inspect batteries and replace them per device guidelines to prevent leakage-related damage
- Keep spare wax guards and replacement parts on hand for quick maintenance
Call A Professional
Seek professional help if you notice persistent crackling, loss of volume, or no sound despite cleaning. Stop using the devices if you detect leaking battery electrolyte, visible corrosion, or physical damage. When in doubt about water exposure or warranty coverage, contact an audiologist or the device manufacturer’s support team for guidance.
FAQ
How often should I clean my Rexton hearing aids?
Daily brushing and a wax removal check are recommended, with a full cleaning session using the kit weekly or as needed based on earwax production.
Can I use the drying box after every cleaning session?
Yes. The drying box helps remove residual moisture and prolongs device life when used as directed.
Is it safe to clean the earmold separately?
Yes, if you use the appropriate cleaning steps provided by your clinician; ensure it’s completely dry before reattaching.
What if I still hear crackling after cleaning?
Crackling may indicate moisture or hardware issues. Dry thoroughly and consult a professional if the issue persists.
Should I clean both ears at the same time?
Yes, performing symmetrical cleaning helps maintain balanced care and reduces the likelihood of forgetting one side.
What should I do if the cleaning tools degrade?
Replace worn brushes or picks promptly to avoid scratching or damaging the device surfaces.
Buying Guide
When choosing cleaning tools and accessories for Rexton hearing aids, consider factors such as compatibility with Rexton models, durability of brushes and picks, and the effectiveness of wax removal products. Look for a dedicated Rexton hearing aid cleaning kit with brush and wax remover that includes a soft brush, wax remover, and safe cleaning cloths. A matching hearing aid cleaning brush and wax pick set for Rexton offers precise tools for stubborn buildup, while a Rexton drying box dehumidifier for hearing aids ensures proper moisture control after cleaning. If buying as a bundle, verify that all items support your specific Rexton model and that replacement parts are readily available. Consider storage solutions that keep tools organized and protected from dust. For users with multiple devices, investing in a larger drying box with enough space can improve efficiency. Finally, check warranty coverage and manufacturer recommendations to maintain best performance and longevity.
Leave a Reply