How to Clean a Breville Juicer

Maintaining a Breville juicer helps preserve juice quality, extend the appliance’s life, and reduce flavor transfer between blends. This guide provides practical, step-by-step instructions to clean Breville juicers safely and effectively, including when to use brushes and dishwasher-safe parts. Readers will learn efficient routines for daily quick cleans and deeper cleans for thorough maintenance.

Quick Answer

Quick Method: Rinse the juicer parts immediately after use, disassemble, and wash with warm, soapy water. Use a Breville juicer cleaning brush to scrub hard-to-reach areas, then dry completely before reassembling. For tough pulp, run a short rinse cycle with water and a pinch of mild soap if your model supports it.

What You’ll Need

Breville juicer cleaning brush
Breville juicer dishwasher safe parts
Breville juice fountain cleaning kit

	Breville .BJE820XL/19 Cleaning Brush
	Breville Pulp Container for the Die Cast Juice Fountain Elite 800JEXL

Before You Start

Unplug the juicer and disconnect all detachable parts before cleaning. Allow parts to cool if the juicer just finished a juicing cycle. Use warm, not boiling water to avoid warping plastics. Keep the motor housing dry and wipe it with a damp cloth. Time estimates vary, but plan 5–15 minutes for a quick clean and 20–40 minutes for a full clean weekly.

Step-By-Step: How To Clean A Breville Juicer

Unplug and disassemble the juicer, removing the filter basket, auger, blade/strainer, and pulp container.
Rinse each piece under warm running water to loosen pulp and seeds before soap cleaning.
Wash parts in warm, mild dish soap. Use the Breville juicer cleaning brush to scrub crevices and the mesh screen thoroughly.
Rinse all parts again, ensuring no soap residue remains, especially from the mesh and sealing gaskets.
If your model allows, place dishwasher-safe parts in the top rack. Use a gentle cycle and a mild detergent.
Wipe the motor base with a damp cloth; never submerge it. Check the user manual to confirm any model-specific cautions.
Dry each part completely with a clean towel or air-dry on a rack before reassembling.
Reassemble and run a quick rinse with clean water to remove any leftover soap from the interior of the machine.
Inspect seals and gaskets for wear. Replace any damaged components to prevent leaks and maintain performance.
Perform a deeper clean monthly by soaking removable parts in warm, soapy water for 10–15 minutes, then scrubbing and rinsing thoroughly.
Store parts completely dry in a clean area to prevent mold and odor buildup.

Troubleshooting

Symptom	Likely Cause	Fix	Prevention
Pulp residue after cleaning	Mesh screen clogged or gaskets dirty	Clean mesh with brush; soak parts if needed	Rinse immediately after juicing
Parts won’t align during reassembly	Misaligned connectors or warped parts	Check orientation; ensure no warping from heat	Dry parts completely and handle gently
Unpleasant odor persists	Residual pulp in hard-to-reach areas	Deep clean, soak, and scrub with brush	Clean after each use; avoid leaving pulp overnight
Leaks around the base	Seals not seated properly	Inspect and reseat seals; replace worn gaskets	Regularly inspect seals during cleaning

Common Mistakes

Using abrasive cleaners on the mesh screen, which can wear the holes.
Submerging the motor housing or letting water seep into the base.
Forgetting to dry parts completely, leading to mold or odor issues.
Skipping the cleaning brush and relying only on hands for scrubbing.
Overfilling the dishwasher with multiple pieces that aren’t rated as dishwasher safe.

Tips For Best Results

Clean immediately after juicing to minimize dried pulp and staining.
Keep the breville juicer cleaning brush handy near the sink for quick maintenance.
Disassemble and pre-rinse components to speed up the washing process.
Regularly inspect the filter screen for signs of wear and replace as needed.
Assign a brief weekly cleaning routine to maintain peak performance.

Call A Professional

Seek professional help if the juicer exhibits persistent leaks, unusual noises during operation, or motor overheating after a thorough clean. Do not attempt internal repairs yourself. If the unit is under warranty and issues arise, contact the manufacturer or authorized service center to avoid voiding coverage.

FAQ

Is it safe to put Breville juicer parts in the dishwasher?

Many parts are dishwasher safe on the top rack, but always check the user manual for model-specific guidance.

How often should I deep clean my Breville juicer?

A thorough cleaning every 1–2 weeks is often enough for typical home use, with quick cleans after each juicing session.

What should I do if the mesh screen is damaged?

Replace the mesh screen or the entire filter basket to maintain juice quality and prevent pulp leakage.

Can I use vinegar to clean the juicer?

Vinegar can be used for descaling metal parts if recommended by the manual; use it sparingly and rinse thoroughly afterward.

What maintenance helps extend juicer life?

Regular cleaning, inspecting seals, avoiding soaking the motor base, and storing parts dry will extend the appliance’s life.

Buying Guide

When selecting a Breville juicer or replacements, consider size, noise level, energy efficiency, controls, and placement. Size matters for countertop space and storage, while noise level affects kitchen comfort during early-morning juicing. Energy-efficient models use less power during operation and idle times. Controls should be intuitive—look for simple on/off, pulse settings, and easy one-touch cleaning options. Consider where you place the unit—under-cabinet clearance and accessibility for cleaning matters. Compare dishwasher-safe parts, availability of cleaning kits, and the durability of the filter screen. If multiple users will operate the same machine, a model with dishwasher-safe components and a straightforward cleaning routine can save time and effort.