How to Clean Windows With Norwex
Cleaning windows with Norwex products offers a water-friendly, chemical-free approach that leaves glass streak-free and sparkling. This guide focuses on practical steps using Norwex microfiber cloths designed for glass and general cleaning tasks, helping American households achieve clear, glossy windows with minimal effort.
Quick Answer
Use a damp Norwex Window Cloth to wipe the glass, followed by a dry Window Cloth for a streak-free finish. For tougher smudges, start with a damp EnviroCloth to lift grime, then finish with the Window Cloth. Always work in small sections, overlap strokes, and avoid drying sun exposure to prevent streaks.
What You’ll Need
- Norwex Window Cloth microfiber glass cleaning
- Norwex EnviroCloth for windows glass cleaning kit
- Norwex microfiber window cleaning bundle Window Cloth + EnviroCloth
![]() |
Norwex Basic Package – Window & Enviro Cloth |
Before You Start
Preparing the cleaning area helps prevent drips and damage to nearby surfaces. Move furniture away from the windows, lay down a soft cloth to catch any moisture, and ensure the room is not exposed to direct sunlight during cleaning, which can cause streaks. Time investment typically ranges from 15 to 30 minutes for a standard set of windows. Safety note: Norwex cloths are designed for household use; avoid using abrasive surfaces that could scratch glass.
Step-By-Step: How To Clean Windows With Norwex
- Gather your Norwex cloths and place a damp EnviroCloth nearby for heavy grime.
- Wipe the window frame and edges with the EnviroCloth to remove dust and buildup.
- Fold the Window Cloth to its clean side and wipe a small section of the glass in vertical strokes.
- Switch to a dry Window Cloth to buff the area using horizontal or circular strokes until no moisture or streaks remain.
- For stubborn smudges, lightly dampen the Window Cloth again and reclean only that spot, then dry immediately.
- Repeat across each pane, cleaning from top to bottom to catch any drips as you go.
- If your windows have screens, wipe the screens separately with the EnviroCloth or a dry Window Cloth to avoid transferring grime back onto glass.
- Use a microfiber corner to reach tight corners and corners around hardware without leaving lint behind.
- Finish by inspecting the glass in natural light; re-treat any streaks with a quick pass of the dry Window Cloth.
- Store the cloths in a clean, dry place to maintain their effectiveness between cleanings.
- For a multi-room cleaning, create a simple rotation plan to maintain consistent results across all windows.
- Post-clean maintenance: wipe windows every few weeks using the same method to prevent heavy buildup.
Troubleshooting
| Symptom | Likely Cause | Fix | Prevention |
|---|---|---|---|
| Streaks after cleaning | Glass was too dry or glass surface was warm | Wipe with a slightly damp Window Cloth, then dry thoroughly | Clean during cooler, overcast times |
| Cloudy residue | Residue from linty cloths | Use a clean, dry Window Cloth; ensure cloth has been laundered without fabric softeners | Wash cloths regularly per care instructions |
| Smudges on edges | Hard-to-reach areas | Use the EnviroCloth first, then follow with the Window Cloth | Include corner folds in routine |
| Cloth fibers leaving lint | Cloth wear or improper washing | Wash cloths with non-filming detergent; air dry | Replace worn cloths as needed |
Common Mistakes
- Cleaning in direct sunlight or on a hot glass surface, which can cause rapid drying and streaks.
- Using dirty or linty cloths that leave fibers on the glass.
- Mixing cleaning methods that require different cloths, causing buildup or confusion about which cloth to use first.
- Neglecting window edges and frames, allowing grime to transfer back onto clean glass.
Tips For Best Results
- Always start with damp EnviroCloth to lift grime before using the Window Cloth for drying and polishing.
- Fold the Window Cloth to a clean side frequently to avoid re-depositing dirt on the glass.
- Clean windows on overcast days or when the glass is cool to prevent streaks caused by quick drying.
- Keep a dedicated set of Norwex cloths for windows to prevent cross-contamination with other cleaning tasks.
Call A Professional
Consider contacting a professional if windows have extensive hard water stains, mineral buildup, or structural damage that makes glass cleaning risky or ineffective. If you are unsure about cleaning high exterior panes or large commercial windows, professional services can ensure safety and complete coverage without damaging frames or seals.
FAQ
What is the best order to clean windows with Norwex?
Start with the EnviroCloth to lift grime, finish with the Window Cloth to dry and polish for a streak-free look.
Can I use Norwex cloths on tinted windows?
Yes, Norwex cloths are gentle on glass; test on a small area first to ensure no film or damage.
Do I need cleaning solution with Norwex cloths?
No chemical cleaners are required; water and the microfiber cloths are typically sufficient.
How often should I launder Norwex window cloths?
Routinely wash after a few uses or when visibly dirty; avoid fabric softeners as they reduce performance.
What should I do with stubborn mineral deposits?
Use a damp EnviroCloth to lift mineral buildup, then proceed with the Window Cloth for a final dry pass.
Are these cloths reusable for multiple rooms?
Yes, designate a set of cloths for home use across rooms to maintain cleaning efficiency.
Is there a specific maintenance routine for the cloths?
Air dry after washing; avoid high heat and chlorine-based detergents to preserve microfiber integrity.
Buying Guide
When choosing Norwex tools for window cleaning, consider size and type of windows, frequency of cleaning, and storage space. A compact kit with Window Cloths plus an EnviroCloth often covers most households, while a bundled set may provide better value for frequent cleaners. Look for microfiber density and weave quality, ensuring the cloths are soft, lint-free, and machine washable. Noise level is not a factor here, but ease of use and edge reach are important for windows with mullions or tight corners.
Key factors include:
- <bSize and fit: select cloths that comfortably cover standard window panes and edge areas.
- Noise and friction: microfiber fabrics glide smoothly without scratching glass or frames.
- <bEnergy and eco impact: reuseable cloths reduce chemical waste and disposable wipes.
- <bControls: simple care controls; machine wash without fabric softeners extends life.
- <bPlacement: store cloths near cleaning supplies for quick access and to encourage regular use.
For most homes, a duo kit combining Norwex Window Cloth with EnviroCloth provides a practical balance of cleaning power and convenience. If windows demand frequent maintenance or you work with large panes, a bundle that includes both cloths can streamline the process.

Leave a Reply